101012 Foothills Blvd., Roseville, CA 95747 USA  |  1-800-772-8700  |  1-916-786-3800  |   |  © Copyright 1996-2013. All rights reserved.


www.pasco.com/prodCatalog/ME/ME-8701_digital-indicator/index.cfm


Digital Indicator

ME-8701

 

Overview

The ME-8701 Digital Indicator is a component of the PS-2204 PASPORT Displacement Sensor though it can be used as a stand alone device.  

It is ideally suited for use with any of PASCO's Structures Sets where small deflections of I-beam members are being measured as loads are applied.  The Digital Indicator can measure displacements within 0.01 mm over a range of 10.00 mm with the results shown on the four and one-half digit LCD display.  

The Digital Indicator can easily be mounted onto a support rod up to 12 mm in diameter in order to hold it in place and ensure accurate measurements.

Includes

  • Indicator
  • Pivot Rod Clamp
  • Phillips screwdriver #0
  • Back Plug Panel
  • Storage box for clamp, panel and screwdriver

Order Guide

Selected Product:

Digital Indicator (ME-8701)

 Qty.

ADDITONAL INFO: Please review the information below for product requirements,
recommendations and options.

Recommended

The Digital Indicator is ideal for use with PASCO Structures Systems.

10101 Foothills Blvd., Roseville, CA 95747 USA  |  1-800-772-8700  |  1-916-786-3800  |   |  © Copyright 1996-2013. All rights reserved.


www.pasco.com/prodCatalog/ME/ME-8701_digital-indicator/index.cfm